Technical  /  Cladding Systems  /  Eternit Fibre Cement Panels  /  Invisible fixings

Invisible fixings

The invisible fixing system is either based on the innovative flexible glue system for backside sanded panels or an undercut anchor.

Flexible glue system

The Advantages of the flexible glue fixing of large size cladding panels are:

  • Decorative interior or exterior cladding is part of contemporary architecture
  • The architect can realize the aspect he created on the drawing table.
  • The system is highly aesthetic, especially compared with conventional fixing systems.
  • The gluing material is permanently elastic, so that dilatations or any other movement of the sheets can be compensated. If the Panel is to be glued, the adhesive must be used in accordance with the application Guidelines and guarantee conditions of the adhesive supplier:
  • Assembly temperature +5°C to +40°C
  • Relative humidity ≤ 90%
  • Material temperature ≥ 3°C above temperature of dew point
  • Bonding possible for all panel Thicknesses Please contact our Technical Department for further information on our Service Line 400 890 1007.

Fixing system with undercut anchor

Fa?ade panels are mounted using undercut anchors, screws and washers. The thicknesses of the panels have to be 12mm. The panel hanger or tail for mounting the panel belongs to a particular aluminum sub construction.

For downloadable information, please visit our Download Section.

Our Technical Department will be delighted to offer you its support and advice.

Please contact our Technical Department for further information on our Service Line 400 890 1007.

Copyright 3ibest©2009